Alkali-tolerant Recombinant Protein A Agarose

Catalog Number:
LT12014
Packing Details:
1 mL resin, crosslinked 6% beaded agarose supplied as 50% slurry (e.g., 1mL of settled resin is equivalent to 2mL of 50% slurry) in 0.02% sodium azide
Binding Capacity:
10~20 mg/ml rabbit IgG or 15~25 mg/ml human IgG
Support pH Stability:
2-11 (short term); 3-10 (long term)
Average Particle Size:
45 to 165 microns
Exclusion Limit:
10,000 to 4,000,000 daltons
Maximum Volumetric Flow Rate:
approx. 1mL/minute (for 1cm diameter column); Maximum Linear Velocity: 30cm per hour; Maximum Pressure: less than 4.5psi (0.3 bar)
Storage:
4 °C - 8 °C in 20% ethanol
Shelf Life:
3 years
Description:

LifeTein Protein A Agarose is an alkali-tolerant Protein A Agarose that has been covalently immobilized onto 6% beaded agarose. The high binding Protein A agarose resin can be used for antibody affinity purificaiton. The immobilized Protein A is used for polyclonal IgG purification from rabbit, human, dog or cat serum.

Highlights:

  • Alkali tolerant: Improved alkaline resistance. NaOH can be used to regenerate resin.
  • High Binding Capacity: The high binding capacity of 10-20 mg/ml IgG to Protein A is perfect for batch- or column- type affinity purification.
  • Stability: Specially designed sepharose linked to recombinant alkali-tolerant Protein A with spacer arms for improved stability and binding capability.

Binding buffer: 20 mM sodium phosphate, 150 mM NaCl, pH 7.4

Elution buffer: 100 mM sodium citrate, pH 3.0

Neutralization buffer: 1M citrate buffer, pH 9.0

  1. Wash the prepacked column with 5~10 column volumes of distilled water to remove 20% ethanol.
  2. Equilibrate the column with 5~10 column volumes of binding buffer.
  3. 1:10 dilution of serum with binding buffer. Filtrate the diluted serum through a 0.45 μm filter and load the sample.
  4. Wash with 10 column volumes of binding buffer.
  5. Elute with 5 column volumes of elution buffer and neutralize collect fractions with neutralization buffer.
  6. After each separation cycle, regenerate the resin by washing with approximately 3~5 column volumes of 0.1 M citrate buffer (pH 3.0).
  7. Confirm the purity of the collected antibody by SDS-PAGE analysis.
  8. Purification capacity: ≥30 mg of rabbit IgG per ml of recombinant protein A agarose gel.

Recombinant Staphylococcal Protein A Agarose          Recombinant Staphylococcal Protein A Agarose

Typical binding and elution conditions with protein A Agarose

Species

Antibody Class

Protein A binding

pH value of binding buffer

pH value of elution buffer

Human

IgG1

++

6.0~7.0

3.5~4.5

IgG2

++

6.0~7.0

3.5~4.5

IgG3

-

8.0~9.0

<7.0

IgG4

++

7.0~8.0

2.5~4.5

Cow

IgG2

++

 

2

Goat

IgG2

+

 

5.8

Mouse

IgG1

+

8.0~9.0

5.5~7.5

IgG2a

+

7.0~8.0

4.5~5.5

IgG2b

+

7.0

3.5~4.5

IgG3

+

7.0

4.0~7.0

Rat

IgG1

+

>9.0

7.0~8.0

IgG2a

-

>9.0

<8.0

IgG2b

-

>9.0

<8.0

IgG3

+

8.0~9.0

3.0~4.0

Rabbit

no distinction

++++

7.4

3.5~4.5

Notes:

  1. Avoid air bubbles.
  2. Regenerate the resin every 5 purification in order to maintain the product efficiency.
  3. After every 10 separation cycle, wash the resin with 5 column volumes of 20% ethanol and 5~10 column volumes of 70% ethanol sequentially to remove hydrophobic substances.
  4. Keep at 4~8 °C in 20% ethanol.
For research use only!
  • 1 Units in Stock

Ask a Question

$336.00

Add to Cart:

Customers who bought this product also purchased...

LifeTein LifeTein provides custom peptide synthesis service, recombinant proteins, peptides, cytokines, custom antibody service and custom protein service. LifeTein is the world leader in fast peptide synthesis service with lab facility located in New Jersey USA. LifeTein Peptide 100 Randolph Road, Suite 2D, Somerset USA New Jersey 08873
Copyright © 2024 LifeTein.com. Powered by LifeTein